ACDP-2 BDC2 G Series

Notice:
1. Above items are must-to-have tools for BMW G-Chassis BDC2 all key lost programming. For ACDP old user, you just need buy the one which you do not have, for new user, need buy all of them.
2. If you have other device which can read and write BMW DME ISN, you do not need the ACDP Module 3+ B48 Interface Board)

ACDP-2 Basic Module Features:
Yanhua Mini ACDP-2 supports 93/24/25/35/95 Series EEPROM in circuitprogramming(ICP) and on adapter board programming(OBP). This module is a necessary basic configuration for other modules.

Extended Functions: By expanding more adapters to achieve various functionsauch as ECU programming key programming/matching, ECU refresh.
The current adapters include: BMW CAS, BMW FEM/BDC, BMW DME, Meter/ Instrument, BMW Key refresh, BMW FRMF (Fotwl), BMW EGS (Gearbox), Fujitsu CPU, Vw MQB, Jaguar Land/ Rover KVM, Porsche BCM, Volvo, etc.

Mini ACDP-2 Advantages:

1. No need removing chip, No need soldering, No need cutting line, No need lifting the pin.
2. USB direct connection, plug and play. wifi connection, wireless free.
3. Pin intelligent detection, Data reading and writing is safe and reliable.

Yanhua ACDP BMW BDC2 All Keys Lost Procedure:

How to Enter the All Key Lost Menu In ACDP APP?

• BMW- FEM/BDC- IMMO/Mileage- BDC2 ICP+ OBD (F/G Chassis)- Add Key (All key lost)

How to Do BMW BDC2 All Key Lost?

Step 1: Backup coding data

• Use Yanhua ACDP Module 3 and B48 Interface Board to backup EEPROM data

Step 2:  Backup FAFP data
Step 3: Write IMMO data
Step 4: Write coding data
Step 5: Made dealer key

• After making the dealer key, turn on the ignition to do key match

Step 6: Write DME ISN

• Verify the key can start the car normally, then go to next step

Step 7: Reset EGS EWS(turn on ignition, but not start the car)

• After finishing these steps, start the engine - both the key and vehicle should now function properly.

Support the following BMW BDC2 IMMO Add keys: